Installation of Intake Silencer and Exhaust

  • 02-045MAKE SURE THAT THE FILTER HAS THE INLET HOLES TOWARDS THE UPPER SIDE.
  • FIX THE FILTER ON THE CARB, WITH A  STEEL CLAMP, AND THE FILTER TO THE CHASSIS SIDE RAILS WITH 02-046PLASTIC CLAMPS (SEE FIG. 35/36)

 

 

 

 

  • 02-047INSTALL THE FLEXIBLE (L= 65mm – FLEXIBLE COMPLETELY CLOSED) AND THE EXHAUST HEADER (SEE FIG. 37) AND CONNECT THE EXHAUST.
  • INSTALL THE FIBER STRIP AROUND THE FLEXIBLE AND FIX 02-048WITH THE 3 SPRINGS (SEE FIG. 38).

 

 

 

 

THE ENGINE IS READY TO BE STARTED